Joined in 2023 
82 
63 About this deal
Like the original, the RPM2 pod has no airflow adjustment. What you see is what you get so I would imagine this device is purely for a Direct Lung vape. DTL vaping uses devices with high wattage to pump power into the coil. This process is able to produce a lot more vapour. However, the side effect is that it creates extra heat. To cool this down, DTL vaping uses lots of air.
I would recommend juice ratios of 70/30 – 80/20 with the RPM2 mesh coil and ratios no higher than 60/40 with the 0.6ohm DC MTL coil. Smok IPX80 Pod Kit – Battery Performance So the diversity of the airflow system is most effective for those already familiar with the various restrictions available for direct lung vaping. SC 1.0 Ohm RPM coil:The SC 1.0 Ohm RPM coil is ideal for any juices with a higher PG percentage, usually anything from 50% or higher, as these lower resistance coils do not perform well with high VG liquids. The SMOK RPM 2 has a built-in battery, and you can charge it immediately after removing it from the box. If you have the SMOK RPM 2S, though, you’ll need to install an 18650 battery before charging the device. Remove the magnetic battery cap on the rear side of the device and insert the battery with the positive pole facing up. Replace the battery cap. Connect the device to your computer using the included USB-C cable. The device’s display indicates when the charging sequence is complete. How to Fill the SMOK RPM 2 Pod If you’d like to know approximately how many more puffs your SMOK RPM 2 will produce before it’s time to recharge the battery, press the fire and “+” buttons simultaneously.
What Pod Is Best For Nord 4?
If you experience leaking with the SMOK RPM 2 pod, the first thing you should do is make sure that the nozzle of your e-liquid bottle fits the pod’s filling hole. The SMOK RPM 2 pod has a very narrow filling hole, and you may find it helpful to transfer your e-liquid to a bottle with a needle tip. Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling. There are just two coil variations included with the kit, one of which is designed for a direct lung vape and the other for a MTL style. Rotating or spinning the rather stiff dials to the left will open the airflow as indicated and turning them right reduces it. You’re not given much to grip when making precise adjustments, something of a pain when making a 180 degree turn.
As previously stated the 3000mAh internal battery will hold its own for an extended period of time. That’s something we’ll be looking at later in the review. One of the best features of the SMOK RPM 2 is the fact that it allows you to replace your atomizer coil while keeping your existing pod. Replacing the coil separately makes it possible for you to have a variety of different vaping experiences with the same device. Buying new coils is also significantly cheaper than replacing your pod constantly. DC 0.6 Ohm RPM2 coil: The 0.6 Ohm RPM2 coil works best with higher VG e-liquids, but the slightly higher resistance will not be as powerful as the other two RPM2 coils. With the 0.4Ω coil installed I only had to charge it for an hour in the evening for it to last the next day. Pros: The SMOK RPM 2 is one of the hottest products in vaping right now because it adds some advanced features to the pod vaping paradigm in ways that we haven’t seen previously. With its huge full-color display and 80-watt adjustable power range, the SMOK RPM 2 is capable of producing some truly enormous clouds – and with its 7 ml pod capacity, you won’t need to worry about refilling your device constantly.Triple 0.6 Ohm RPM coil:This is best suited with any juice that has at least 50% PG right through to 70% VG and, in some cases, even higher VG percentages. As with the original RPM pod system, the SMOK RPM 2 allows you to replace the atomizer coil separately from the rest of the pod. To replace the coil in your pod, just pull the old coil out and push the new one in. The RPM 2 is compatible with the coils for the original SMOK RPM and also has several new coils of its own. With the replaceable coil system, the SMOK RPM can deliver whatever type of vaping experience you want. Enjoy a high-nicotine mouth-to-lung experience or chase clouds to your heart’s content – the choice is yours. What’s the Difference Between the SMOK RPM 2 and RPM 2S?
Before using your SMOK RPM 2 for the first time – or when replacing the atomizer coil – SMOK recommends filling the pod and allowing it to rest for at least 15 minutes before vaping. How to Replace the SMOK RPM 2 Coil The internal battery includes all the usual protections you would expect to find and it’s said to have a very rapid firing response time of 0.001 seconds.
Cons:
As much as this is a very powerful integrated battery, it could easily have been replaced with an 18650. Judging by the 34mm width of the mod it’s a viable option. Categorized underneath are the resistance of the coil, voltage (only displayed while vaping), a puff counter and at the lowest point of the screen, the time spent on the last vape. Yeah its a little taller, a little wider but apart from that its designed pretty much the same, so a lot of the following details will sound very familiar. Pod Housing DTL, MTL, and RDL vaping styles require different coils. You can roughly split this up as being either sub-ohm or 1-ohm and above. DTL vaping uses coils of around 0.6-ohms and below, while RDL is in the 0.5 – 0.8-ohm range. MTL, on the other hand, uses 0.8-ohm or above. The opening is also wide enough to accommodate most bottle nibs too. Smok IPX80 Pod Kit – How To Fill the Pod
There’s also a QC card and a safety card that suggests using 5V/1A charging units. Smok IPX80 Pod Kit – Features When it comes to e-liquid, the 0.16 Ohm coil works better with 70% VG e-liquid or higher, the 0.6 Ohm coil can be paired with 50/50 e-liquids and high PG e-liquids.The SMOK RPM2 Kit was sent to me for the purpose of review. All views and opinions are solely those of my own and do not necessarily reflect the opinion of others. Inside the Box: There’s also a compromise in flavour property. The increased warmth generated by the coil seems to nullify clarity and presence of the fruits while vapour production is as consistent as ever. Vaping style refers to the way that you inhale the vapour. There are a few main styles: Mouth-to-Lung: Filling can be achieved on the fly thanks to the design of the lift tab and the pod makes a very secure connection with the battery section. Now that you understand the various factors that influence which type of atomizer to use let’s look at a few different SMOK coils.
Great Deal 
New Comment